Outputs and Publications

Friction_teal

Publications

Azam, A., Dorgham, A., Khaemba, D. N., Salehi, F. M., See, T., & Neville, A. (2020). Understanding the role of surface textures in improving the performance of boundary additives, part II: Numerical simulations. Tribology International, 106252. doi: https://doi.org/10.1016/j.triboint.2020.106252

Azam, A., Dorgham, A., Parsaeian, P., Neville, A., Morina, A., & Wilson, M.C.T. (2019). The mutual interaction between tribochemistry and lubrication: Interfacial mechanics of tribofilm. Tribology International, Volume 135, pp 161-169. doi: https://doi.org/10.1016/j.triboint.2019.01.024

Bai, M., Namus, R., Xu, Y., Guan, D., Rainforth, M.W., Inkson, B.J. (2019). In-situ Ti-6Al-4V/TiC composites synthesized by reactive spark plasma sintering: processing, microstructure, and dry sliding wear behaviour Wear, Volumes 428-429 pp. 237-245. doi:https://doi.org/10.1016/j.wear.2019.202944

Bryant M, Sin JR, Emami N, Neville A. 2020. Effect of proteins and phosphates on the degradation and repassivation of CoCrMo alloys under tribocorrosion conditions. Tribology – Materials, Surfaces & Interfaces. doi: https://doi.org/10.1080/17515831.2020.1746012

Dorgham, A., Parsaeian, P., Azam, A. and Wang, C., Morina, A., Neville. A., 2019. Single-asperity study of the reaction kinetics of P-based triboreactive films. Tribology International, vol. 133, pp. 288-296 doi: https://doi.org/10.1016/j.triboint.2018.11.029

Dorgham, A., Wang, C., Morina, A. and Neville, A., 2019. 3D tribo-nanoprinting using triboreactive materials. Nanotechnology, 30(9), p.095302. doi: https://doi.org/10.1088%2F1361-6528%2Faaf70c

Dorgham, A., Azam, A., Morina, A. and Neville, A., 2018. On the Transient Decomposition and Reaction Kinetics of Zinc Dialkyldithiophosphate. ACS applied materials & interfaces, 10 (51), pp 44803–44814. doi: https://doi.org/10.1021/acsami.8b08293

Dorgham, A., Neville, A. and Morina, A., 2018. Tribochemistry and Morphology of P-Based Antiwear Films. Advanced Analytical Methods in Tribology. Springer, Cham, pp.159-214. doi: https://doi.org/10.1007/978-3-319-99897-8_6

Dorgham, A., Parsaeian, P., Neville, A., Ignatyev, K., Mosselmans, F., Masuko, M. and Morina, A., 2018. In situ synchrotron XAS study of the decomposition kinetics of ZDDP triboreactive interfaces. RSC Advances, 8(59), pp.34168-34181. doi: https://doi.org/10.1039/c8ra04753g 

Ghadiri, M., Pasha, M., Nan, W., Hare, C., Vivacqua, V., Zafar, U., Nezamabadi, S., Lopez, A., Pasha, M. and Nadimi, S., 2020. Cohesive Powder Flow: Trends and Challenges in Characterisation and Analysis. KONA Powder and Particle Journal, p.2020018. doi: https://doi.org/10.14356/kona.2020018

Lee, Z.S., Maiti, R., Carré, M.J., Lewis, R., 2020, Morphology of a Human Finger Pad during Sliding against a Grooved Plate: A Pilot Study, Biotribology, Vol. 21, 100114. doi: https://doi.org/10.1016/j.biotri.2019.100114

Maiti, R., Duan, M.Q., Danby, S., Lewis, R., Matcher, S.J., Carré, M.J., 2020, Morphological Parametric Mapping of 21 Skin sites throughout the Body using Optical Coherence Tomography, Journal of the Mechanical Behavior of Biomedical Materials, Vol. 120, 103501. doi: https://doi.org/10.1016/j.jmbbm.2019.103501

Nadimi, S., Ghanbarzadeh, A., Neville, A. and Ghadiri, M., 2019. Effect of particle roughness on the bulk deformation using coupled boundary element and discrete element methods. Computational Particle Mechanics, pp.1-11 doi: https://doi.org/10.1007/s40571-019-00288-3

Wang, Y., Dorgham, A., Liu, Y., Wang, C., Ghanbarzadeh, A., Wilson, M.C., Neville, A. and Azam, A., 2020. Towards optimum additive performance: A numerical study to understand the influence of roughness parameters on the zinc dialkyldithiophosphates tribofilm growth. Lubrication Science,Lubrication Science. 2020; 1– 14. https://doi.org/10.1002/ls.1522

Watson, M., White, B., Lanigan, J., Slatter. T., Lewis. R. 2020. The composition and friction-reducing properties of leaf layers. Proc. R. Soc. A 476: 20200057 doi: https://doi.org/10.1098/rspa.2020.0057

Watson, M., Lewis, R., Slatter, T., 2020. Improvements to the linear transform technique for generating randomly rough surfaces with symmetrical autocorrelation functions. Tribology International, pp.106487 doi: https://doi.org/10.1016/j.triboint.2020.106487

Runner up Best Paper Wear of Materials 2019: Michael Watson, Peter Christoforou, Paulo Herrera, Daniel Preece, Julia Carrell,  Matthew Harmon, Peter Krier, Stephen Lewis, Raman Maiti, William Skipper, Ellis Taylor, Jonathan Walsh, Mohanad Zalzalah, Lisa Alhadeff, Reuben Kempka, Joseph Lanigan, Zing  Siang Lee, Benjamin White, Kei Ishizaka, Roger Lewis, Tom Slatter, Rob Dwyer-Joyce, Matthew Marshall 2019. An analysis of the quality of experimental design and reliability of results in tribology research. Wear, v. 426-427, Part B, pp. 1712-1718. doi: https://doi.org/10.1016/j.wear.2018.12.028 

Buckley-Johnstone, L., Harmon, M., Lewis, R., Hardwick, C., Stock, R. (2018), “A Comparison of Friction Modifier Performance using Two Laboratory Scale Tests” Journal of Rail and Rapid Transit, Proceedings of the IMechE, Part F, doi: https://doi.org/10.1177/0954409718787045.

Byers, R.A., Maiti, R., Danby, S.G., Pang, E.J., Mitchell, B., Carré, M.J, Lewis, R., Cork, M.J., Matcher, S.J., 2018, Sub-Clinical Assessment of Atopic Dermatitis Severity Using Angiographic Optical Coherence Tomography, Biomedical Optics Express, Vol. 9, No. 4, pp 2001-2017. doi: https://doi.org/10.1364/BOE.9.002001

Clark ER, Hemmings K, Greco S, Neville A, Porter KE, Bryant MG. 2020. Tribological Characteristics of Human Vascular Smooth Muscle Cells: The Implication of Disease State on Friction. Biotribology. 22 doi: https://doi.org/10.1016/j.biotri.2020.100122

Matthew J. Derry, Timothy Smith, Paul S. O’Hora, and Steven P. Armes (2019), Block Copolymer Nanoparticles Prepared via Polymerization-Induced Self-Assembly Provide Excellent Boundary Lubrication Performance for Next-Generation Ultralow-Viscosity Automotive Engine Oils ACS Applied Materials & Interfaces 11 (36) 33364-33369, doi: https://pubs.acs.org/doi/10.1021/acsami.9b12472

Harmon, M., Powell, B., Barlebo-Larsen, I., Lewis, R., 2018, “Development of Grease Tackiness Test”, in press, Tribology Transctions. http://eprints.whiterose.ac.uk/135875/

Ishizaka, K., White, B., Watson, M., Lewis, S.R., Lewis, R., 2020, Influence of temperature on adhesion coefficient and bonding strength of leaf films: A twin disc study, Wear, 2020, vol. 454-455 pp. 203330, doi: https://doi.org/10.1016/j.wear.2020.203330

Ishizaka, K., Lewis, S.R., Hammond, D., Lewis, R., 2018, “Chemistry of Black Leaf Films Synthesised with Rail Steels and its Influence on Low Friction Mechanism”, RSC Advances, 2018, 8: 32506-32521, doi: https://doi.org/10.1039/c8ra06080k.

Khaemba, D. N., Azam, A., See, T., Neville, A., & Salehi, F. M. (2020). Understanding the role of surface textures in improving the performance of boundary additives, part I: Experimental. Tribology International, 106243.
doi: https://doi.org/10.1016/j.triboint.2020.106243

Namus. R., Nutter. J., Qi. J., Rainforth. M.W. (2020), The influence of protein concentration, temperature and cathodic polarization on the surface status of CoCrMo biomedical grade alloys, Applied Surface Science, Vol. 499: 143908, doi: https://doi.org/10.1016/j.apsusc.2019.143908 

Nan. W., Pasha. M., Bonakdar. T., Lopez. A., Zafar. U., Nadimi/. S., Ghadiri. M.(2018), Jamming during particle spreading in additive manufacturing, Powder Technology, Vol. 338: 253-262, ISSN 0032-5910, doi: https://doi.org/10.1016/j.powtec.2018.07.030

Skipper WA, Nadimi S, Chalisey A, Lewis R. (2019) Particle characterisation of rail sands for understanding tribological behaviour. Wear 432–433, 202960. https://doi.org/10.1016/j.wear.2019.202960

Tao. X., Qi. J., Rainforth. M., Matthews. A., Leyland. A. (2020) On the interstitial induced lattice inhomogeneities in nitrogen-expanded austenite. Scripta Materialia, vol. 185, pp. 146-151. https://doi.org/10.1016/j.scriptamat.2020.04.045

Thornley B, Beadling R, Bryant M, Neville A. 2020. Investigation of the Repassivation Process of CoCrMo in Simulated Biological Fluids. CORROSION. 539-552 76.6 doi: https://doi.org/10.5006/3423

Wade A, Beadling AR, Neville A, De Villiers D, Cullum CJ, Collins S, Bryant MG. 2020. Geometric Variations of Modular Head-Stem Taper Junctions of Total Hip Replacements. Medical Engineering & Physics. 34-47 83 doi: https://doi.org/10.1016/j.medengphy.2020.07.017

Wade A, Copley R, Clarke B, Alsheikh Omar A, Beadling AR, Liskiewicz T, Bryant MG. 2020. Real-time fretting loop regime transition identification using acoustic emissions. Tribology International. 145 doi: https://doi.org/10.1016/j.triboint.2019.106149

Wade A, Copley R, Alsheikh Omar A, Clarke B, Liskiewicz T, Bryant M. 2020. Novel numerical method for parameterising fretting contacts. Tribology International. 149 doi: https://doi.org/10.1016/j.triboint.2019.06.019

Wang. Y., Dorgham. A., Liu. Y., Wang. C., Wilson. M.C.T., Neville. A., Azam. A. (2020) An assessment of quantitative predictions of deterministic mixed lubrication solvers Journal of Tribology, June 2020, pp.1-42. doi:https://doi.org/10.1115/1.4047586

Wang. Y., Dorgham. A., Liu. Y., Wang. C., Ghanbarzadeh. A., Wilson. M.C.T., Neville. A., Azam. A. (2020) Towards optimum additive performance: A numerical study to understand the effect of roughness parameters on the zinc dialkyldithiophosphate tribofilm growth. Lubrication Science, vol. 1-14 pp.1-42. doi: https://doi.org/10.1002/ls.1522

Zhu. J., Qi. J., Guan. D., Ma. L., Dwyer-Joyce. R. (2020) Tribological behaviour of self-lubricating Mg matrix composites reinforced with silicon carbide and tungsten disulfide. Tribology International, vol. 146, pp. 106253. https://doi.org/10.1016/j.triboint.2020.106253

Friction_magenta

Media

Watson. M. (2020) Press release in major media outlets:

Lewis, R. (2019) Press release in major media outlets and the Institute of Mechanical Engineers on solutions to leaves on the line:

Lewis, R. (2018) Interviewed by Matt Burgess for Wired “The sludgy, complex problem of trains and leaves on the line, 13th May. Available at: https://www.wired.co.uk/article/network-rail-leaves-on-the-line-uk (Accessed: 16 July 2018

Friction_orange

Conferences

Oral Presentations

A.R. Beadling, D. Lunn, M.G. Bryant, A.C. Redmond, A. Neville, R.M. Hall, (2018) Hip joint simulation of healthy weight and obese patient walking gait profiles: from patient to simulator, 4th International Conference on Bio-Tribology, 26th – 29th September, Montreal, Canada

Beadling. A.R., Bryant. M., Neville. A., (2019) Quantification of corrosive material loss from CoCrMo-Ti6Al4V fretting contacts. ESBiomech Conference, 7-10 July 2019, Vienna. Abstract

Maiti R. et al. (2020) From Macroscopic to Microscopic: Experimental and Computational Methods to Investigate Bio-tribology. In: Van Toi V., Le T., Ngo H., Nguyen TH. (eds) 7th International Conference on the Development of Biomedical Engineering in Vietnam (BME7). BME 2018. IFMBE Proceedings, vol 69. Springer, Singapore Article

Maiti R., Wagner R.M.F., Perrault C.M., Carre. M.J., Neville. A., Bryant. M.G., Lewis. R. (2019) Tribological simulation of interaction between cardiovascular device and HUVEC cells. 8th International Conference on Mechanics of Biomaterials and Tissues, Hawaii, USA, 15th-19th December 2019.

Nadimi S., Pencheva P., Ghadiri M. (2019) DEM Simulation of Mechanofusion System. 8th International Conference on Discrete Element Methods, The Netherlands, 21st – 26th July.

Nadimi S., Skipper W., Ghadiri M., Lewis R. (2019) DEM Insight on Manipulating Friction by Rail Sanding. 8th International Conference on Discrete Element Methods, The Netherlands, 21st – 26th July.

S. Nadimi, A. Ghanbarzadeh, M. Ghadiri, A. Neville (2018), Discrete element modelling of shear deformation of rough particles, 6th European Conference on Computational Mechanics (ECCM 6) and 7th European Conference on Computational Fluid Dynamics (ECFD 7), 11 – 15 June 2018, Glasgow, UK, Abstract

S. Nadimi, M. Bai, B. Inkson, A. Neville, R. Brydson, M. Ghadiri (2019), The role of glidants in interparticle friction,  International Congress on Particle Technology 2019 (PARTEC 2019), 9th – 11th April 2019, Nurnberg, Germany

X. Li., Dwyer-Joyce. R., (2019), Measurement of Friction by Nano-Scale Slip Using a High Power Ultrasonic Wave,  74th STLE, 19th – 23rd May 2019, Nashville, USA

Lewis, R., Christoforou, P., Wang, W.J., Beagles, A., Burstow, M., Lewis, S.R., 2018, “Investigation of the Influence of Rail Hardness on the Wear of Rail and Wheel Materials Under Dry Conditions (ICRI Wear Mapping Project)”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Cuervo, P., Christoforou, P., Lewis, R., Beagles, A., Santa, J.F., Toro, A., 2018, “Twin Disc Assessment of Wear Regime Transitions In R400ht – E8 Pairs”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Kempka, R., Falconer, R., Gutsulyak, D., Lewis, R., 2018, “Effects of Oxide and Water on Friction – New Test Method and Friction Mapping”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Santa, J.F., Christoforou, P., Cuervo, P.A., Toro, A., Beagles, A., Lewis, R., 2018, Evaluation of Rolling Contact Fatigue of Rail Materials in Twin Disc Tests”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Earl, S., Rankin, K.E., Lewis, R., Smith, L., Rainforth, W.M., 2018,  “Comparison of Squats and Studs from Different Traffic Environments”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Ishizaka, K., Lewis, S.R., Hammond, D., Lewis, R., 2018,  “Investigation of Leaf Chemistry and Leaf Layer Low Adhesion Mechanism”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Lewis, S.R., Fletcher, D.I., Beagles, A., Ishizaka, K., Buckley-Johnstone, L., White, B., Harmon, M., Grigson, C., Brunskill, H., Zhou, L., Kempka, R., Lewis, R., 2018, “A Re-Commissioned Flexible Full-Scale Wheel/Rail Test Facility”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

White, B., Laity, P., Holland, C., Six, K., Trummer, G., Lewis, R., 2018, “Iron Oxide and Water Paste Rheology and Its Effect on Low Adhesion in the Wheel/Rail Interface”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Harmon, M., Santa, J.F., Jaramillo, J.A., Toro, A., Beagles, A., Lewis, R., Buckley-Johnstone, L., 2018, “Evaluation of the Coefficient of Friction of Rails in the Field and Laboratory Using Several Devices”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Christoforou, P., Lewis, S.R., Fletcher, D.I., Lewis, R., 2018, “Benchmarking of Premium Rail Material Wear”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Harmon, M., Powell, B., Barlebo-Larsen, I., Lewis, R., 2018, “Development of Grease Tackiness Test”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Skipper, W.A., Chalisey, A., Lewis, R., 2018, “Particle Characterisation of Rail Sand for Understanding Tribological Behaviour”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Poster Presentations

M. Bai, S. Nadimi, M. Ghadiri, A. Neville, B.J. Inkson (2019) Advanced In-situ Microscopy for Examination of Nanoscale Tribological Contacts. Nanobruecken 19th-21st February, 2019, Berlin, Germany. 

S. Nadimi, M. Bai, B. Inkson, A. Neville, M. Ghadiri (2018) The role of glidants in interparticle friction. Powder Flow workshop, Royal Society of Chemistry, London, UK

S. Nadimi, M. Bai, B. Inkson, A. Neville, M. Ghadiri (2018) The role of glidants in interparticle friction. Annual General Meeting of International Fine Particle Research Institute (IFPRI), Edinburgh, UK 

White, B., Lewis, R., 2018, “The Development of a Traction Gel Assessment Method”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Alturbeh, H., Lewis, R., Six, K., Trummer, G., Stow, J., 2018,  “Implementation of The Water Induced Low Adhesion Creep Force Model (WILAC) into the Low Adhesion Braking Dynamic Optimisation for Rolling Stock Model (LABRADOR)”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Lanigan, J., Krier, P., Buckley-Johnstone, L., White, B., Ishizaka, K., Cooke, J., Barnard, S., Ferriday, P., Beagles, A., Lewis, R., 2018, “Towards a Field Test Methodology for Locomotive Brake Testing using a Representative Low Adhesion Simulation”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Lu, P., Lewis, S.R., Fretwell-Smith, S., Fletcher, D.I., Lewis, R., 2018, “Laser Cladding of Rail; the Effects of Depositing Material on Lower Rail Grades”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Eadie, D.T., Harrison, H., Kempka, R., Lewis, R., Keylin, A., Wilson, N., 2018, “Field Assessment of Friction and Creepage with a New Tribometer”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Fukagai, S., Brunskill, H., Hunter, A., Dwyer-Joyce, R., Lewis, R., 2018, “Measurement of Rolling-Sliding Wheel/Rail Contact Condition using Full-Scale Rig with Ultrasound”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

Fukagai, S., Ma, L., Lewis, R., 2018, “Tribological Approach to Optimize Traction Coefficient during Running-In Period Using Surface Texture”, Proceedings of CM2018, 10th International Conference on Contact Mechanics and Wear of Rail/Wheel Systems, Delft, The Netherlands, 24-26 September 2018.

 

Friction: The Tribology Enigma is funded by the Engineering and Physical Sciences Research Council, under grant no. EP/R001766/1